Single-shaft drum mixer / powder mixer (EM)
The EM drum mixer's field of application
- Small production orders
- Preparation of master batches
- "Just-in-time" mixing jobs
- Product development
This drum mixer can be designed for compliance with FDA and 3-A Sanitary Standards to be used as a sterile mixer and reactor which also meets EHEDG requirements.
Further characteristics of the single-shaft drum mixer
- Technically ideal mixing quality; adjustable mixing intensity (from gentle homogenization to intensive deagglomeration)
- Micro-fine admixture of liquid material; the mixer remains dry and clean
- Selection of filling level from 10% to 100% of working capacity
- Ideal discharging of residues; easy cleaning / sterilization (GMP Standard)
- Integration into your ERP System, mixing programs supplied by PLC
- A bar code scanner can be integrated for online documentation
- You need a limited infrastructure only: manual fork lift, scale and some standard drums
Function of the single-shaft drum mixer
An innovative spiral mixing tool rearranges the mixing goods. There is an upward movement in the periphery and a downward movement caused by gravity in the centre of the mixing vessel. You can improve the cross flow by inclining the mixing vessel up to 25 degrees.
This single-shaft mixer / powder mixer achieves technically ideal mixing qualities. Mixing goods can be dry, wet, suspended or pasty. According to the required processing / mixing result (either gentle or aggressive and dispersive) you can select the mode of operation: gentle blending, deagglomeration, wetting at low energy input, wetting at high energy input, agglomeration, drying, improving of solubility etc.
Product Video
| Single-shaft mixer Type EM The type designation corresponds to the maximum batch size in liters. Even at a low filling level, highest mixing qualities can be achieved. Mixer available on request with double jacket for temperature control and vacuum drying |
Approximate gross volume of the mixer | Approximate dimensions: please observe swivel radii of the rotating mixing chamber! Please request detailed dimension sheets! |
The required drive power can vary greatly depending on bulk density, flow properties, rotational frequency, preparation task such as e.g. deagglomeration. | Weight information can vary considerably depending on size of the drive and the type of design. The dynamic additional loads are very small. | ||||
|---|---|---|---|---|---|---|---|---|
| A | B | C | from | to | ||||
| Liter = dm³ | Liter | mm | mm | mm | kW | kg | ||
| 5 | Drive below | 6,8 | 1320 | 790 | 820+50 | 0,9 | 2,6 | 200 |
| 10 | 13,6 | 1400 | 1420 | 830+60 | 1,2 | 3,4 | 260 | |
| 20 | 27,1 | 1450 | 1440 | 850+60 | 1,6 | 4,5 | 340 | |
| 30 | 40,6 | 1500 | 1450 | 860+70 | 1,9 | 5,4 | 400 | |
| 50 | Drive above | 67 | 1950 | 1450+90 | 1600 | 2,4 | 6,6 | 520 |
| 70 | 94 | 2310 | 1460+13 | 1700 | 2,7 | 7,6 | 620 | |
| 100 | 134 | 2380 | 1500+30 | 1760 | 3,1 | 8,8 | 740 | |
| 150 | 201 | 2600 | 1600+45 | 2100 | 3,7 | 10,3 | 900 | |
| 200 | 268 | 3090 | 1700+55 | 2300 | 4,2 | 11,6 | 1050 | |