Skip to main content

Gyraton® mixer type GM

amixon® Gyraton® mixer for large batches


This large-volume mixer is a new development. It requires only low electrical connected loads. It mixes accurately, effectively and very gently. Gyraton® mixers are also particularly cost-effective because they require very little installation space. The properties of the mixing goods are irrelevant. Even moist or poorly flowing materials (time-solidifying materials) are homogenized.

The function is similar to all other amixon® Mixers. But the specific energy input is lower with the Gyraton® mixer. The mixer spiral rotates slowly and conveys the mixed materials upwards. It always touches only a part of the mixing chamber wall. In addition to rotation, the mixer shaft performs a circular path above the mixing chamber floor. The pivot point of the shaft lies in the plane of the gas-tight shaft seal. The entire cylinder surface is tangent to the mixing element spiral. This also applies to the bottom. Mixing takes place without dead space because the base is designed as a calotte. The lower mixing unit arm has the same curvature as the calotte shell.

The mixer shaft is only supported and driven at the top. The shaft sealing is permanently hygienic and gas-tight. The unit shown here can homogenize 70 m³ of mix. This is the content of a 40-foot deep-sea container. This mixer design requires very little installation space.

Frequently asked questions about the Gyraton® mixer:

Find all questions and our answers about the Gyraton® mixer here.

Contact us

amixon GmbH
Halberstaedter Strasse 55
33106 Paderborn
Germany
Telephone: +49-5251-688888-0
Telefax: +49-5251-688888-999 

Other international sales offices

<h1 id="product-ph"></h1>