Deutsche Version
For dry, moist and suspended goods extremely gentle or intensive deagglomeration treatment
Continuous mixer
Further characteristics:
- Technically ideal mixing quality
- Option between operation as batch mixer or continuous mixer
- Adjustable mixing intensity (from gentle homogenization to intensive deagglomeration)
- Definite retention period independently from mixing device/rotation speed
- No product loss at start of production
- No product loss at end of production
- Micro-fine admixture of liquid material without contamination of the mixer
- Specific filling level selection from 10% to 80% of cubic capacity
- Ideal emptying of residues
- Extended process including: moistening, tempering, drying, reaction processing
- Highest health standard (GMP Standard); safe cleaning; dry or wet
- Mixing apparatus mounted and driven only on upper part
Operation at start of production:
The discharge valve of the mixer is closed. All the gravimetry working dosing components are started simultaneously with small mass flow and tune themselves automatically in relation to one another. The level of the mixing vessel fills up continuously, starting up the mixer when it reaches half capacity. Tuning is completed once the mixer is filled to half its capacity approximately. The discharge device opens slowly once the mixer is filled at approx. 80% of cubic capacity. A filling level of 80% is kept constant. The dosing flows are increased up to the maximum mass flow while maintaining a constant synchronization.
Operation at end of production:
All dosing components gradually slow down the mass flow and then switch off at the same time. The mixer discharges the mixture continuously until it is completely empty.
The discharge valve of the mixer is closed. All the gravimetry working dosing components are started simultaneously with small mass flow and tune themselves automatically in relation to one another. The level of the mixing vessel fills up continuously, starting up the mixer when it reaches half capacity. Tuning is completed once the mixer is filled to half its capacity approximately. The discharge device opens slowly once the mixer is filled at approx. 80% of cubic capacity. A filling level of 80% is kept constant. The dosing flows are increased up to the maximum mass flow while maintaining a constant synchronization.
Operation at end of production:
All dosing components gradually slow down the mass flow and then switch off at the same time. The mixer discharges the mixture continuously until it is completely empty.
| Sizes and flow rates | Complex mixing tasks, four and more indiviual ingredients (solids and liquids); extended retention period |
Simple mixing tasks, up to three individual ingredients (solids and liquids); short retention period |
|||||
| Type | Maximum cubic capacity |
Retention at max. filling level |
Volume flow |
Volume flow |
Retention at max. filling level |
Volume flow |
Volume flow |
| [litres] | [minutes] | [litre per minute] |
[m3 per minute] |
[minutes] | [litre per minute] |
[m3 per minute] |
|
| AM | 50 | 3 | 17 | 1 | 1,0 | 50 | 3 |
| AM | 100 | 3 | 33 | 2 | 1,0 | 100 | 6 |
| AM | 200 | 3 | 67 | 4 | 1,0 | 200 | 12 |
| AM | 400 | 3,5 | 114 | 7 | 1,2 | 343 | 21 |
| AM | 600 | 3,5 | 171 | 10 | 1,2 | 514 | 31 |
| AM | 800 | 3,5 | 229 | 14 | 1,2 | 686 | 41 |
| AM | 1000 | 3,5 | 286 | 17 | 1,2 | 857 | 51 |
| AM | 1500 | 4 | 375 | 23 | 1,3 | 1125 | 68 |
| AM | 2000 | 4 | 500 | 30 | 1,3 | 1500 | 90 |
| AM | 3000 | 4 | 750 | 45 | 1,3 | 2250 | 135 |
| AM | 4000 | 4 | 1000 | 60 | 1,3 | 3000 | 180 |
| AM | 5000 | 5 | 1000 | 60 | 1,7 | 3000 | 180 |
| AM | 6000 | 5 | 1200 | 72 | 1,7 | 3600 | 216 |
| AM | 7000 | 5 | 1400 | 84 | 1,7 | 4200 | 252 |
| AM | 8000 | 6 | 1333 | 80 | 2,0 | 4000 | 240 |
| AM | 9000 | 6 | 1500 | 90 | 2,0 | 4500 | 270 |
| AM | 10000 | 6 | 1667 | 100 | 2,0 | 5000 | 300 |